FEATURES
OPERATING INSTRUCTIONS
9
2
Two 4 Channel Transmitters
Code Learning
2nd Channel Output for Trunk release
3rd Channel Output
Door Entry Protection
Personal/Panic Feature
Shock Sensor / Dual Zone Dual Adjust (Plug-In)
Shock Sensor Warn Away Feature
Remote Trigger Disable
Dome Light Supervision
Remote Shock Sensor Disable
Five Function LED Plug-In
Intrusion Event Memory
120dB 6 Tone Siren
Last Door Automatic Arming
Flashing Parking Lights
Anti Car jack (Programmable)
Starter Disable Built-in Relay
R.F. Lock-Out Safety Feature
Valet Override Switch Plug-In
Faulty Zone By-Pass
Audible/Visual Intrusion Alert
Door Locking & Unlocking with Ignition Key
Remote Door Lock/Unlock Plug-In
Double Unlock Pulse
Transmitter Programmable Features
Automatic Safety Re-Arm
Active/Passive Arming
Disarm Alarm With 2nd Channel
Parking Lights Stay ON or OFF After Disarm
Permanent Chirp Disable
Auto Door Lock With Ignition Key
Car Jack By Remote or Door
Installer Programmable Features: (Dip Switch)
Door Locking (1sec. or 3.5sec.)
Anti Car Jack
Doors Not To lock In Passive
Double Unlock Pulse
TRANSMITTER BUTTON OPERATION:
IMPORTANT: The microprocessor alarm system has been designed so that upon arming,
a 10 second arming delay will be effected. This is to give the electronics in the vehicle, a
chance to stabilize. ( window roll-up, shock sensor)
ACTIVE ARMING MODE:
Arm the alarm system by pressing the transmitter button 1, once momentarily. The alarm
will arm and will confirm with 1 siren arming chirp, LED will be solid and start to flash slow
after 10 seconds
PASSIVE ARMING MODE:
In passive arming mode, upon closing the last door there will be a 30 second arming delay.
The LED will be flashing rapidly indicating that the system is in passive arming phase. After
30 seconds, the alarm will arm by itself.
(Programmable)
ARMING WITH DEFECTIVE ZONE ALERT:
If after arming the alarm, a defective zone has been detected. The alarm will confirm the
detection of the defective zone by chirping the siren and flashing the lights 4 times, (2-3
seconds after the arming confirmation).
DISARMING THE SYSTEM:
Disarm the alarm system by pressing transmitter button #1, once again momentarily. Alarm
disarms and will confirm with 2 disarming siren chirps, Lights will flash twice, LED will turn
off. Optional starter disable feature will be deactivated, Door locks will unlock automatically
Dome light will be illuminated for 30 seconds or until ignition key is turned to accessory "ON"
position.
PANIC MODE:
For emergency situations, press and hold button #1, of the transmitter for 3 seconds. This
will activate the panic mode. The alarm siren will sound and the parking lights will flash for
60 seconds (or until the transmitter button #1 is pressed again for 1 second).
ALARM TRIGGERED:
If a violation of the vehicle is taking place, the siren will sound and the parking lights will flash
for 60 seconds. After this 60 seconds duration, the alarm will automatically reset and resume
protecting the vehicle.
INTRUSION ALERT:
If a sensor input (door switch, shock sensor) has been violated while the system was armed,
the LED will be flashing rapidly and upon disarming the alarm system, the siren will confirm
with 3 disarming siren chirps and 3 light flashes. Check the vehicle and its contents to verify
if any violation has taken place.
