manualshive.com logo in svg

Commander comset T16, Operating Instructions For User

Share
Download
Commander comset T16 Operating Instructions For User Download Page 29

General: Opemting Instructions for Users

1.9.5.24

Call Diversion

Every station can activate a call diversion process whereby all incoming calls are answered at another
allocatable station. Normal outgoing communication can be carried by station (A). However, all incoming
calls (internal and external) are rung at station (B). Note that station (B) can ring station (A) during
this procedure.
Note that if station (B) has originally a COS (0) it is now upgraded to be able to answer external calls.

 

 

  8 2 4

To activate call forwarding at station (A), press the ‘S’ key, digit   then followed by
the two digit number of the destination station 

 Station (A) displays a slow flashing

facilities LED to indicate this condition and is now provided with a special dial tone
as a reminder. Station (B) displays a slow flashing facilities LED to also indicate this
condition. To cancel this function, station (A) has to press the ‘S’ key and digit 

 

 71

To activate the facility from station (A), dial the “facility code” followed by the two

(B). As acknowledgement that this function is active, the station

hears the special dial tone on handset lift-off.

is from the initiating station (A), by once again dialling the

1.9.5.25

Call 

 Me

“Follow Me” is an extension to the “Call Diversion” procedure: however with this procedure it is possible
to not only redirect calls to a particular station, but to also then further redirect the calls to another
station without returning to the original station.
The procedure is activated from station (A) by initiating the normal “call-diversion” procedure.
Normal outgoing communication can be carried out by station (A). However, all incoming calls (internal
and external) are rung at station (B). Note that station (B) can ring station (A) during this procedure.

 

 

  8 2 4

Subsequent re-routing of the call can be done from any station. The procedure is:
press the ‘S’ key, digit ‘2’ and station 

 number.

Deactivation can only take effect at station (A) (the originator) by again pressing ‘S’
and ‘2’ (a toggling function).

 

 72

The procedure is the same as for “Call Diversion”.

can only take effect at station (A) by off-hook and dialling

l-36

Issue 2

With 

Compliments 

Absolute 

Phone 

& 

Data

Summary of Contents for comset T16


































Reviews:

No comments

Brands by name

Popular brands

Load more brands