Command access SLP-UL-M-KIT Installation Instructions Manual Download

Page: 5 / 6

E. Continue sliding push pad half way out of the base rail so activating bracket is accessible. Next,

remove metal rod and AB mount can be put aside.

STEP 2

- Install Motor Mount

A. Attach the link assembly to the end of the activating bracket. Next, place activating

bracket into center of the motor mount.

C. Re-install metal rod securing activating bracket to motor mount.

B. Secure link assembly to activating bracket with Hex wrench provided.

Activ

ating Br

acket

Metal Rod

AB Mount

Link Assembly

Baserail

Summary of Contents for SLP-UL-M-KIT

Page 3: ...NTROL SYSTEM NO VOLTAGE LOCKING HARDWARE CAT Electrified Exit Device Installation Example Recommended Power Supplies All Command Access exit devices field installable kits have been thoroughly cycle tested with Command Access power supplies at our factory For more information click here or go to our website ...

Page 4: ...STEP 1 Disassemble Exit Device A Remove End Cap Filler Plate B Remove 4 screws from baserail C Partially slide push pad off approx 2 3 D Using 5 32 drill bit Open up the 2 back screw holes 3 4 ...

Page 5: ...STEP 2 Install Motor Mount A Attach the link assembly to the end of the activating bracket Next place activating bracket into center of the motor mount C Re install metal rod securing activating bracket to motor mount B Secure link assembly to activating bracket with Hex wrench provided Activating Bracket Metal Rod AB Mount Link Assembly Baserail ...