5
Doc # xxxxx rev.x
Visit our website for more details
www.CommandAccess.com
U.S. Customer Support
1-888-622-2377
Canada Customer Support
1-855-823-3002
T E C H N I C A L I N F O R M AT I O N
Specifications
Troubleshooting & Diagnostics
• Operating Voltage Range: 24 VDC +/- 10%
• Hold Current: 260 mA @ 24 VDC
• Surge Current: 1.6 A for 350 ms @ 24 VDC
• Peak Current: 7 A @ 24 VDC
• Input wires to PM300 : Non-polarized Black (+)(-)
• Output wire from PM300: Yellow=Pull Coil; Orange= Hold
Coil; Green=Common
Power Supply for PM300 and PM300D in High Output Mode:
In High Output mode, the PM300 is designed for & MUST BE
powered by the Command Access PS1, PS5-4, or PS5-6 power
supplies only.
Wire Run Guidelines:
For best results we recommend that your maximum wire run not exceed the following:
18ga.= 700’ 16ga. = 1000’ 14ga. = 1250’ 12ga. = 1500’.
Latch Retraction
Lever Control
• Operating Voltage Range:
Switches
• REX:
Green - Common (C)
Blue - Normally Open (NO)
Gray - Normally Closed (NC)
Green/Black - Common (C)
Blue/Black - Normally Open (NO)
Gray/Black - Normally Closed (NC)
• LBM:
•
Check the Module is on High Output.
•
Confirm that power supply is a Command Access PS1, PS5-4, or PS5-6
24VAC/DC 350mA
12VAC/DC 700mA
