6
U S C U S T O M E R S U P P O R T 1 - 8 8 8 - 6 2 2 - 2 3 7 7 | W W W . C O M M A N D A C C E S S . C O M | C A C U S T O M E R S U P P O R T 1 - 8 5 5 - 8 2 3 - 3 0 0 2
1
2
Re-install the push pad end cap with (2) screws.
13.
Slide housing back onto baserail being cautious
not to pitch any wires
14.
While sliding housing back on make sure motor bracket
fits between exsiting groves.
15.
Confirm motor has seated properly but see if the
bottom bracket is sitting flush on the baserail.
16.
Attach to power and test to confirm
motor is functioning.
17.
1
2
Re-install (2) screws securing base rail to housing.
18.
CONTINUED