Compact Scaler Switcher
Comm-Tec S.r.l.
29
www.comm-tec.it
4.3.4 Control Compact Scaler Switcher or 3rd Party Device from Local
Firstly, according the following connection diagram to connect all devices as needed.
Secondly, send command
50787%
(serial control mode 1, factory default) via RS232
communication software.
Lastly, send the right command of the Scaler Switcher or other remote RS232 device
connected in present system. Connect as below:
Control Compact Scaler Switcher or 3rd party device from local
4.3.5
Control Compact Scaler Switcher or 3rd party device form Remote
Firstly, according the following connection diagram to connect all devices as needed.
Secondly, send command
50788%
via RS232 communication software.
Lastly, send the right command to control the Scaler Switcher. Connect as below:
3rd party
PC
48V
LINE
IR EYE
IR IN
IR OUT
MIC INPUT
MIC
FIRMWARE
AUDIO OUT
L
R
RES RESET
RS232
Tx
Rx
L
R
INPUTS
OUTPUTS
3-HDMI
2-HDMI
1-HDMI / MHL
4-DP
5-VGA
HDMI
HDBT
CONTROL
DC 24V
IR OUT
IR IN
HDMI OUT
HDBT IN
Tx
Rx
HDBaseT Receiver
