User Manual
SW-81VA-2
COMM-TEC GMBH
SIEMENSSTRASSE 14
T49(0)7161/3000-0
WWW.COMM-TEC.DE
D-73066 UHINGEN
T49(0)7161/3000-333
7.2 Autoswitching
The active source is routed. Priority is given to source with the lowest number (1, 2,
3, 4,....) if more than one source is activ.
If an input is selected by front panel, IR-Remote or RS-232 during Autoswitching,
this input is switched to the output and the Autoswitching function is interrupted.
7.3 RGB Mute
The output signal is switched off. This function is useful when the image should
not yet be visible on the display.
Note:
Autosequencing, Autoswitching and RGB Mute are mutually exclusive.
Order of priority: RGB Mute -> Autoswitching -> Autosequencing.
Note:
If the CASCADE function is enabled the three auxiliary functions
by dry contacts are disabled.
RGB Mute and Autoswitching can be activated by serial control (RS-232).
pin
Function
pin
Function
1
Tally 1
14
Input 1
2
Tally 2
15
Input 2
3
Tally 3
16
Input 3
4
Tally 4
17
Input 4
5
Tally 5
18
Input 5
6
Tally 6
19
Input 6
7
Tally 7
20
Input 7
8
Tally 8
21
Input 8
9
--
22
Time
10
--
23 Autoswitching
11
Autosequence
24
+5 VDC
12
RS-232 Rx
25
Ground
13
Mute
