4K HDBaseT 4x4 Matrix Switcher
Follow these steps to connect the devices:
Step1.
Connect the TCP/IP port of 4K HDBaseT 4x4 Matrix Switcher to Ethernet
port of PC with twisted pair.
Step2.
Set the PC’s network segment to the same as 4K HDBaseT 4x4 Matrix
Switcher’s. Do please remember the PC’s original network segment.
Step3.
Set the 4K HDBaseT 4x4 Matrix Switcher’s network segment to the same
as the router.
Step4.
Set the PC’s network segment to the original one.
Step5.
Connect the 4K HDBaseT 4x4 Matrix Switcher and PC(s) to the router.
PC(s) within the LAN is able to control 4K HDBaseT 4x4 Matrix Switcher
asynchronously.
Then it’s able to control the device via GUI.
4.4.2
GUI for TCP/IP control
4K HDBaseT 4x4 Matrix Switcher provides with built-in GUI for convenient TCP/IP
control. GUI allows users to interact with 4K HDBaseT 4x4 Matrix Switcher through
graphical icons and visual indicators.
Type 192.168.0.178 in your browser, it will enter the log-in interface shown as
below:
There are 2 selectable usernames – admin (default password: admin) and user
(default password: user). Log in as admin can access more configuration interfaces
than user. Enter username and the right password. Here is a brief introduction to
Comm-tec Srl
30
www.comm-tec.it
