4K HDBaseT 4x4 Matrix Switcher
Output 2 corresponds to Input 1.)
Operation: Press Output 2 button, LCD screen display “AV: 1->2 IR: 1->2”, and
indicators of input 1 and output 2 turn on and last for 3 seconds. Then output 2
corresponds to input 1.
4.1.4
Clear operation
When you switch output channel, learn EDID data, or set EDID data, press
Clear
button to withdraw the operation before you press “
ENTER
” to carry it on. When you
press it, the matrix will return to the previous status.
4.2
IR Control
By using IR & HDBaseT transmission technology, the 4K HDBaseT 4x4 Matrix
Switcher has some functions as follows:
1)
Control far-end output device from local.
2)
Control local input/output device remotely.
3)
Control the 4K HDBaseT 4x4 Matrix Switcher locally/remotely.
4.2.1
Usage of IR Remote
1
Standby button, press it to enter/ exit standby
mode
2
Input channels, range from 1~4 (buttons 5~8
are not available), corresponding IR signal
switched synchronously when switching input
channels.
3
Menu buttons,
ALL
,
EDID
and
CLEAR
, same
with the corresponding front panel buttons.
Please refer to
4.1 Front Panel Button
Control
for details.
4
: Navigation buttons.
ENTER: Confirm button.
5
OUTPUTS (buttons 5~8 are not available)
In normal mode: output channel selection
buttons, each channel has 1 IR IN, 1
HDBaseT, 1 RS232, and 1 AUDIO outputs,
and channel 1~4 have HDMI outputs.
In EDID invoking mode: press button 1/2 to
switch among the 5 embedded EDID data
Note:
With this IR remote, 4K HDBaseT 4x4 Matrix Switcher can be controlled by
the built-in IR, the extended IR receiver connected to the “IR EYE”/”IR ALL IN” and
the IR receiver on the far-end receiver.
Comm-tec Srl
17
www.comm-tec.it
