S E T U P A N D O P E R A T I O N M A N U A L
Page 8
With the magnet in place, the breaker extraction tool is designed to attach directly
to the metal chassis of the panel. When not in use the breaker extraction tool
should be attached to the front of the panel for direct and consistent access.
Extracting Slimline Breakers
Each slimline breaker has two threaded brass screw hole features designed for
extraction.
The breaker extraction tool is fitted with screw features designed to attach to the
breaker. Attach the breaker extraction tool to the front of the breaker with these
screws.
Attach the breaker extraction tool to the front of the slimline breaker.
With your finger on the breaker extraction tool, slowly pull the breaker extraction
tool directly away from the breaker panel to release the breaker from the panel.