Comm Net Systems GMT 125-15A, Setup And Operation Manual

Page: 17 / 26

GMT 125 - 15/15 FUSE PANEL
SETUP AND OPERATION MANUAL
OPERATION - PAGE 11
Site Settings
Configure Site Settings
y Site name
y
Site location
Panel Settings
Configure Panel Settings
y
Global alarm threshold %
y 40-100
y Voltage Calibration Offset
y
Offset can be applied in increments of +/- 3.0V to raise or lower the
displayed A/B bus voltages. Any offset greater than +/- 3.0V is invalid
and will not be saved.
y
Bus A and B fuse settings (ampacity per channel)
y 0.00-20.00 (0= fuse not installed)
Network Settings
Network Configuration Settings
y IP v4 settings
y
IP v6 settings
Upload Firmware
Follow the instructions on this page to upgrade the firmware on your
embedded ethernet module.
Reboot Device
This page allows the user to reboot the embedded ethernet module while not
disrupting normal operation of power equipment.