OTTO PREBUILT SERIES. USER GUIDE
32
Installing the button, the USB and the RGB LED
Turn the OTTO radiator down and remove the bottom chassis cover.
Pass through the grooves and glue the RGB LED strip (item 1) to the
inner surface of the chassis front panel.
Install the USB Type-C connector (item 3) and the USB 3.1 (item 4)
onto the mounting plate (item 2), fastening them with screws (item 5).
Install the brass legs (item 6) onto the mounting plate with the nuts
(item 7).
Fasten the connector board to the chassis with screws (item 8).
Install the power button (item 9) in the chassis.
Pass to the next assembly step along with the bottom cover and
its fasteners.
OTTO BUILDER’S EDITION / DIY / CASE SFF.
ASSEMBLY SCHEMATICS
9.12
9.
Item 9
Item 4
Item 3
Item 2
Item 5
Item 1
Item 8
Item 6
Item 7
1
1
3
2
2
4
5
6
7
