OTTO PREBUILT SERIES. USER GUIDE
12
13. Switch OTTO ON.
14. Lift up the fore part of OTTO at 40-45º to release air.
15.
Repeat refilling until the reservoir and liquid system are full to the level
mark.
ATTENTION: there should be some air in the system to let warm
coolant swell out.
16.
Put on the air filter and the magnetic side panel when OTTO is filled
with coolant. Now you can use OTTO.
Always use only specially prepared coolant or distilled water with the ad-
dition of an additive for liquid cooling circuits according to the instructions.
HOW TO FILL THE COOLANT
6.
Air
Normal position
of OTTO
OTTO on left side,
side panel and filter
removed;
OTTO is raised 40-45º
to release air.*
* — Be careful when working with an open device,
for safety reasons we recommend closing the side panel
every iteration.
Fill the coolant into
the filling port
Coolant
