OTTO PREBUILT SERIES. USER GUIDE
27
1
2
Installing the GPU modules — 2070 Super Turbo Evo / 2080Ti Strix
Steps:
Connect the power wire to the riser.
Connect data cables to the riser.
Install the 220V 90° Wire (item 1) and stretch it as shown in the diagram.
Crimp the CPU return hose before installing the card.
Install the graphic card with a water block (item 2) into the riser and fasten
the bracket with screws.
Install the bracket plug (item 2) and fasten it with the screw.
Connect the power cables to the graphic card and lay them in one of the two
ways (either under the graphic card, or up around the graphic card).
Pull the free ends of the cables into the holes of the chassis, as shown
in Item the drawing and leave them free.
OTTO BUILDER’S EDITION / DIY / CASE SFF.
ASSEMBLY SCHEMATICS
9.7
9.
2070 Super Turbo Evo
2080 Strix
Item 1
Item 2
1
3
2
4
4
5
6
7
8
7
7
1
2
