manualshive.com logo in svg

COMGROW COMGO Z1 LaserGRBL, Beginner'S Manual

Introducing the COMGROW COMGO Z1 LaserGRBL, a user-friendly laser engraving machine perfect for beginners. Get started with confidence by downloading our free Beginner's Manual from manualshive.com. This comprehensive manual provides step-by-step instructions, making it easy to unleash your creativity and master the art of laser engraving.

Share
Download
background image

Disclaimer 

COMGO Z1 Laser Engraver supports the most popular engraving software LaserGRBL.

LaserGRBL is an open source, easy to use and powerful software, but LaserGRBL only sup-ports Windows (Win XP/Win 7/ 
Win 8/XP/ Win 10).

Obtain and install LightBurn

The COMGO Z1 Laser Engraver receives mobile commands from the computer in real time, and the engraver needs to stay 
connected to the computer and cannot close the engraving software (LaserGRBL or LightBurn) during the engraving pro-

cess. In addition, the configura-tion of the computer can affect the speed and even the quality of the engraving. The

following will focus on the installation and use of LaserGRBL software. 

 Note: 

It is recommended that you adjust your computer's power settings to "Never Sleep" mode.

Please read the following carefully before using LaserGRBL on the Comgrow Z1

02

Summary of Contents for COMGO Z1 LaserGRBL


















Reviews:

No comments

Related manuals for COMGO Z1 LaserGRBL

Brands by name

Popular brands

Load more brands