ComfortSystem
– our experience is your guarantee
2 | COMFORTABEL - Bed Backrest
1. Assembly instructions
1.1 Scope of delivery
COMFORTABEL Bed Backrest is packed in a carton containing:
– Mechanics of bed backrest
– Motor
– Controll
– Transformer
– Fixing paper (accessories)
Total weight ca 12 kg
1.2 Unpacking
To facilitate the packing of the factory - the motor is in transport mode. It
means that the motor rear mount NOT is mounted on the bed backrest.
– Unpack the bed backrest from the carton and place it on the floor as
shown in
Figure 1
.
– Turn the motor 90 degrees and mount the L-shaped motor mount in
the engine’s rear mount. Use the enclosed motor bolt and secure it
with the so-called hairpin as shown in
Figure 2
. Assemble and then
screw the L-shaped bracket on the bacrest 4-edge pin.
Use the enclosed Star knob and disk, mount as shown in
Figure 6
and 7
.
Check that the motor house is poiting down as shown in
Figure 10
.
Fixing paper
(see separate installation
instructions)
!
