10
INSTALLATION
& USE
www.comfortcompany.com
INSTALLATION (PERMOBIL
MOUNTING
)
For Permobil
®
Back Supports with Uni-Track System
using Permobil Mounting Plate BL-HSH-SPCR-TRCK1
.
All tools needed are provided.
C
F
D
E
A
1
5
6
2
3
B
1
Start by turning knob
A
counterclockwise.
2
Remove hardware shaft
C
from mounting bracket
B
and set
aside.
3
Loosen bolts
D
with
⅛
” allen wrench provided and remove
along with washers
E
and spacer plate
F
from mounting brack-
et
B
.
D, E
and
F
will be replaced so either discard or retain for
future use.
4
Align mounting bracket
B
and countersunk holes of alternate
mounting plate
H
and attach with provided flat head screws
J
and tighten. Fasteners and allen wrench are provided with
alternate mounting plate.
5
Loosely attach button head bolts
K
and safety washers
L
to
double nuts
M
through alternate plate
H
.
6
Slide nuts
M
into Uni-Track System slots to desired position
and fully tighten bolts
K
with 4mm allen wrench to secure.
7
Insert hardware shaft
C
into mounting bracket
B
and turn knob
A
clockwise to secure. Note: Make sure at least
½
” of shaft
C
is completely through the bottom of
B
at all times (see page 7,
figure 2.5). See pages
15-17
for final adjustments.
Figure 2.10
Figure 2.12
Figure 2.11
H
B
J
4
K
L
M
We can only guarantee that BodiLink
®
Head Support system will
properly mount to the Comfort Company products listed in this
manual. Modifications made in attempt to interface with any other
products voids warranty.