3
18.
Use only for intended household use as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use
of attachments not recommended or sold by unauthorized dealers may cause hazards.
19.
Always use on a dry, level surface. Use on floor only.
20.
DO NOT use outdoors.
21.
WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-
state speed control device.
22.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing
so will void your warranty. The inside of the unit contains no user serviceable parts. Qualified
personnel should perform all servicing only.
23.
Connect to properly grounded outlets only.
24.
PET OWNERS NOTE: The health of birds and some small pets are extremely sensitive to the
fumes given off during the initial use of many appliances. Although these fumes are not harmful
to humans, it is recommended that this heater not be used around birds and small pets during its
initial use until the manufacturing corrosion coatings burn off.
25.
Save these instructions.
SPECIFICATIONS
Voltage Rating
120 V (60Hz)
Power Consumption
1500W, 12.5A
Unit Size
12.75
in. (W) x 10.5 in. (D) x 14.75 in. (H)
Unit Weight
19.95 lbs
SAFETY FEATURES
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch
will automatically shut the heater off. Once the heater is restored an upright position, the heater will
reset. To continue operation, turn on the heater using the supplied remote control or the control panel on
the heater.
Overheat Safety Feature
This heater is equipped with a overheat safety feature. When the heaters internal components reach a
certain temperature that could cause overheat and possible fire, the heater will automatically shut off.
To reset, turn heater off and switch master power switch on the rear of the unit to off position. Unplug
the heater and let it cool down for around 20 minutes. Plug the heater back into the wall outlet and turn
master switch and on/off switch to on.
