7
OPERATING INSTRUCTIONS
1. Start and select working mode
Or
With master power switch at the rear of the unit on, turn the
heater on by pressing the ON/OFF button on the control
panel or by pressing the Power button on the supplied
remote control.
Once power is off, heating elements will stop working at first.
Fan will continue working for up to 3 minutes to emit residual
heat inside the unit.
Or
Select a heat setting.
Press the MODE button to toggle between the three heat
settings.
High Mode uses 1500W; Low Mode uses 750W. ECO
mode is an Economic Energy Saving Function. When ECO
mode is chosen, the heater will set the temperature
automatically to 68
°
F
（
20
℃）
under this mode
2. Setting room temperature
Or
Or
Or
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Or
Set temperature indication varies from 59
℉
to 86
℉，
or
from 15
℃
to 30
℃
. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press
℃
/
℉
button, then digital display will indicate
Fahrenheit value or Celsius value.
When Fahrenheit indicating light’s on, digital display
indicates Fahrenheit value,
When Celsius indicating light’s on, digital display
indicates Celsius value.
