7
OPERATING INSTRUCTIONS
1. Power On and Select Power Mode.
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the POWER button on the
supplied remote control.
Or
Select a heat setting
.
Press the MODE button to toggle between the three heat
settings.
Power for high mode is 1500 watts; and low mode is 1000
watts. ECO mode is an Energy Saving Function. When ECO
mode is chosen the heater will automatically switch from high
mode to low mode and consume 1/3 less power when the room
temperature reaches the set temperature point.
2. Set Thermostat Room Temperature
Or
Or
Or
Adjust the thermostat by pressing the
-
or
+
on the
control panel or remote control to desired temperature.
The temperature indicator will flash during the setting
process. The heater will accept the temperature when it
stops flashing and begin to operate.
Set temperature indication varies from 59
℉
to 86
℉
.
Once you have chosen the desired temperature, the
heater will remain on until the room temperature
increases to the temperature on the digital display. The
heater will cycle on and off to maintain the desired
room temperature.
