5
IMPORTANT SAFETY FEATURES
The safety pilot light marked POWER is illuminated when the control is turned
to HIGH or LOW.
TROUBLE SHOOTING
If your heater fails to operate, please do the following:
Review these instructions to insure you understand the basic operations and
features of your heater.
Check your circuit breaker or fuse for proper operation.
Check for obstructions. Unplug the heater for 30 minutes, clear any
obstructions and restart the heater.
This heater is equipped with a Safety Tip-over device, to reset simply unplug
the heater for 30 minutes, set the heater on a level surface, then follow the
operating instruction found in this manual.
NEVER attempt to open or service the heater yourself. Doing so may cause
damage or personal injury. (See Warranty Card for more information)
CLEANING AND STORAGE
Dust, dirt, pet fur, etc can diminish your heaters performance and can lead to
unwanted odors. For best performance clean your heater frequently, at least once
per season. ALWAYS TURN OFF AND UNPLUG THE HEATER BEFORE
CLEANING.
Turn Heater OFF, unplug it and wait for the heater to become cool.
Use a dry cloth to clean only external surfaces of the heater.
A vacuum with soft brush may used to clean louvered areas.
Wrap and tie the cord to protect it from damage.
Repack the heater in its original carton and store it in dry place.
NEVER attempt to open or service the heater yourself. Doing so may cause
damage or personal injury. (See Warranty Card for more information)
SPECIFICATIONS
Model NO.
EOF260, EOF261 (All specific5% / -10% tolerance)
Voltage
120V
Frequency
60Hz
Output Power (Watts)
600
– 900 – 1500 watts
Electric Current (Amps) 12.5A
BTU’s per/Hour
2000
– 3100 - 5200
