www.desatech.com
115580-01A
9
STOVE CAVITY ASSEMBLY
1. Lift off corrugated box enclosing stove
body crating.
2. Remove all screws fastening the wood frame
enclosure. Spread wood frame open and lift
away from plastic-bagged stove body. The
bottom pieces of pallet wood will remain
bolted to the stove body.
3. Remove plastic bag from stove body.
4. Remove back panel from stove (see Figure 5).
Use an adjustable wrench or a 10 mm socket.
Remove six (6) bolts and washers. Keep bolts
and washers to reattach back panel later.
5. Remove all contents from inside stove cavity.
Contents include:
(1) - Stove bottom
(4) - Legs (Amity models include leg
leveler bolts)
(1) - Bottom door
(1) - Top grate
(1) - Hardware kit bag with fasteners
6. Carefully lay stove body on back to attach bottom
components to stove body (see Figure 6). Rest
stove on drop cloth or blanket to avoid scratching
stove edges.
INSTALLATION
Continued
Figure 5 - Removing Back Panel
Bolt
Product
Identification
Label
Back Stove
Panel
Figure 6 - Laying Down Stove On Side (Stove Style May Vary Depending on Model)
Front of
Stove
Unit
Pallet Wood
Bolted to
Stove Body
Bottom
Top of
Stove Unit
Front of Stove
Unit
Top of
Stove
Unit
Drop Cloth/
Blanket
7. Remove remaining pallet wood attached to
bottom of stove body (see Figure 7). Use an
adjustable wrench to remove bolts.
8. Fasten each leg to stove with four (4) bolts.
Use a flat screw driver to tighten bolt to leg.
Thread bolt in tapped holes on stove body (see
Figure 8 and Figure 9, page 10).
Figure 7 - Removing Pallet Wood From
The Bottom of The Stove
Pallet
Wood
Bolt
Bottom Of
Stove Unit
Front
Pallet
Wood
Figure 8 - Locating Threaded Holes
for Stove Bottom, Legs and Door
Attachment (Appearance May Vary
Depending on Model)
Leg
Hole
Leg
Hole
Leg
Hole
Leg Hole
Door Hinge
Step Bolt Hole
Door Catch Bolt
With Adjustable
Hex Nuts Hole
Stove
Bottom
Holes
Front
Bottom Of Stove Unit
