www.fmiproducts.com
113097-01M
17
INSTALLATION
Continued
2. Place front log onto grate on front of base
assembly. The log will fit down between
grate fingers and posts on front of base
assembly (see Figure 19). This log may
be turned to face either direction.
3. Place left and right crossover logs on top of
back log and front log. Make sure pins on
front and back are inserted into holes on
crossover logs (see Figure 20). Crossover
logs must be placed as shown in Figure
210or holes will not seat onto pins.
4. Add lava rock around base of heater if
desired. Do not put lava rock on logs or
burner.
Figure 19 - Installing Front Log
Front Log
Grate
Fingers
Figure 20 - Installing Left and Right
Crossover Logs
Post
Post
Base
Assembly
Left Crossover Log
Right
Crossover Log
