www.desatech.com
111161-01D
18
5. Locate pegs on the bottom of crossover log
(#5). Slide these pegs into the holes located
in crossover log (#4) and front log (#1). See
Figure 28.
For CCL3018PR/NR Only:
Locate holes on the
bottom of crossover log (#5). Slide the holes
over the left pegs on middle log (#2) and front
log (#1). See Figure 29.
6. Locate pegs on the bottom of crossover log
(#6). Slide these pegs into the holes located
in middle log (#2) and front log (#1). See Fig-
ure 30.
7.
For CCL3930PR/NR only
, locate holes on the
bottom of crossover log (#7). Slide onto the
pegs located in crossover log (#6) and middle
log (#2). See Figure 31.
8. Add lava rock around base of heater if desired.
Do not place any lava rock on logs or burner.
INSTALLATION
Continued
AUT
O
OF
F
ON
Figure 27 - Installing Crossover Log (#4)
(CCL3930PR/NR Shown)
Log #2
Log #3
Pegs
Figure 28 - Installing Crossover Log (#5)
(CCL3930PR/NR Shown)
AUT
O
OF
F
ON
7
Figure 31 - Installing Crossover Log (#7)
to Models CCL3930PR/PRA and
CCL3930NR/NRA Only
Middle Log
(#2)
Crossover
Log (#6)
Holes
Pegs
Figure 30 - Installing Crossover Log (#6)
(CCL3930PR/NR Shown)
AUT
O
OFF
ON
Crossover
Log (#4)
Front Log (#1)
Figure 29 - Installing Crossover Log (#5)
(CCL3018PR/PRA and CCL3018NR/NRA Only)
Crossover
Log (#4)
Front Log
(#1)
AUT
O
OF
F
ON
6
Pegs
Log #2
Front Log (#1)
