Comfort Flex
Rev: February 5th 2016
Check that air intake is not obstructed, and has the required space suggested on Fig. 1
2.- HYDRAULIC CIRCUIT INSPECTION
Water connections are NPT type inner thread (to identify the connection diameter, see unit’s data
sheet). The installation of a water filter is necessary on all hydraulic circuits in order to avoid solid
particles in it, which must be installed on the return side of the circuit, and cleaned once the system´s
initial charge is finished.
Check water filter to be clean.
Verify that all service valves are open.
Check for adequate makeup water supply.
Verify that all piping is filled with water and air has been vented out.
Check Thermometers.
Check Manometers.
Note:
Accessories such as Thermometers, manometers, measuring ports, etc. are recommended but
not necessary for the unit´s operation.
/!
\
WARNING /!
\
If hydraulic circuit contains air, it may compromise the units operation.
1.2. PREVIOUS TO STARTUP CHECKLIST
The following items must be checked, and written on a report, before unit´s startup.
UNIT MODEL:
UNIT SERIAL NÚMBER:
DATE:
JOBSITE:
LOCATION:
INSTALLER CONTRACTOR:
TECHNICIAN / COMPAÑY STARTING THE UNIT:
Summary of Contents for CLIV-ACC-036-A3F
