Comfort Flex
Rev: February 5th 2016
FL=Flow Alarm
Flow Alarm is tripped when low flow is detected, to reset the alarm and correct the problem: reset the
controller unit (turn the unit Off and On).
A1=Freezing Alarm
The temperature sensor B3 Sensor (freezing) is below the programmed value. The alarm will reset once
the temperature value rises.
E1=Alarm, broken return sensor
E2=Alarm, broken injection sensor
E3=Alarm, broken freezing sensor
Sensor failure alarms B1, B2, or B3 respectively; this is due to a false contact or malfunction of the
sensor. It is necessary to troubleshoot the connection or change the sensor.
3.1
TEMPERATURE DISPLAY
To access the temperature on the display navigate using the Up and Down keys.
Navigation Keys
The temperature set by default is the temperature B02 = injection. Using the navigation keys you may
move to B01 = return temp display and B03 = freezing temp display. These temperatures will be
displayed, if no key is pressed after a few seconds the display will return to the initial screen.
Summary of Contents for CLIV-ACC-036-A3F
