Comfort Bilt HP54 Operator'S Manual Download Page 36 | Manualshive

Page: 36 / 36

Comfort Bilt HP54 Operator'S Manual Download Page 36

Operator’s Manual

HP54 Pellet Stove

~ 36 ~

WARRANTY

This warranty is non-transferable and is made to the original retail purchaser only provided that the purchase
was made through an authorized dealer of SMG. It must be installed and operated at all times in accordance with
the Installation and Operating Instructions furnished with this product, as well as any applicable local and
national codes. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty.

SMG Hearth and Home LLC, a Manufacturing Company warrants this HP54 Stove to be free from defects in the
material or workmanship for a period of one year. During that one-year period, SMG will , at their discretion,
furnish parts and labor to correct any defect caused by faulty material or workmanship. For other warranty
repairs, please read the one-year warranty listed below.

ONE-YEAR WARRANTY

All electrical components such as but not limited to blowers, wiring, vacuum switches, speed controls, control
boxes,  switches,  pilot  assemblies,  thermostats,  and  igniters  are  covered  under  SMG  Hearth  and  Home  LLC.’s
one-year warranty. Our firepots and labor are also covered under the one year warranty.
THIS WARRANTYIS LIMITED TO DEFECTIVE PARTS-REPAIR AND/OR REPLACEMENT AT SMG Hearth and Home
LLC.’ S OPTION AND EXCLUDES ANY INCIDENTAL AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH.
This warranty is not transferable and supersedes all other warranties either expressed or implied and all other
obligations to liabilities on our part.    SMG Hearth and Home LLC. does not assume, and does not authorize any
other person to assume for us, any liability in connection with the sale of our products. The warranty applies only
to  products  which  have  not  been  subjected  to  negligent  use,  misuse,  alteration,  accident  or  repairs  made
by anyone not certified by SMG Hearth and Home LLC.

SMG Hearth and Home LLC

9241 Globe Center Drive Suite 120

Morrisville, NC 27560

919-973-4092

919-973-4123

Technical service calls are answered Monday thru Friday
9am to 5pm eastern time.

www.comfortbilt.net

«
...
34
35
36

Summary of Contents for HP54





































Reviews:

No comments