background image

INSTALLATION 

WALL DRILLING AND BRACKET FIXING 

A vertical line up to the ceiling or up to the upper limit, at the center of the area in which the

hood is to be fitted.

A horizontal line 

C

 at a 

X  

A horizontal line 

B

 at

A horizontal line 

A

 at a 

B

.

to the vertical reference line.

Repeat this operation on the other side and on the vertical reference line , checking that

the three marks are leveled.

to the vertical reference line.

Repeat this operation on the other side , checking that the two marks are leveled.

Mark a point (1) on the horizontal line 

B

,

Mark a point (2) on the horizontal line 

C

,

Mark a point (3) on the horizontal line 

A

to the vertical reference line.

Repeat this operation on the other side , checking that the two marks are leveled.

above the cooker top.

inch above the horizontal line

C

B

(1)

A  (3)

Vertical reference line

X

7.48"

below the horizontal line

1.57

"

6.69

"

36.61

"

 

-

 

40.55

"

7.48

"

B

3.15''

1.57

"

3.15

"

3.15

"

6.69

"

unit

inch

36.61" - 40.55"

1.57''

6.69''

Chimney

X

/

15.75"+11.81''

15.35''-

24.41''

15.75

"

Fix the brackets :

 

3/8''

 drill bit.

Drill holes at the marked points with a

Insert the Wall Plugs 11 into the holes.

Fix the hood fixing bracket 

20

 with 3 screws 

10

 (

0.2'' 

x

 1.97''

) at the horizontal line 

B

.

Fix a Chimney fixing bracket 

21

 with 2 screws 

10

 (

0.2'' x 1.97''

)  at the horizontal line 

C

.

7

Summary of Contents for CVP30W4AST

















Reviews: