BEFORE FIRST USE
1. Before using your Electric Pressure Cooker for the first time, remove any dust
from shipping by wiping clean with a damp cloth.
2. Thoroughly clean the cooking pot and sealing ring assembly in the dishwasher
or with warm, soapy water. Rinse, towel or air-dry, and place in the pressure
cooker.
Tips:
①
Exhaust valve: Pull out the exhaust valve from the lid. Clean the internal side
of the exhaust valve and the exhaust valve and float valve of the lid with
brush and cloth at least once a month.
②
Sealing ring: Please remove oil and dirt from the sealing ring with detergent
and brush.
③
Water box: After cooking, the steam may stay in the water box of the external
pot as water. Water in the box should be removed for avoiding bad odor,
please clean it with clean cloth.
Note:
Seal ring
Disassemble and install the block proof cover and seal ring
Block
proof
cover
1. Disassemble and install the block proof cover
2. Disassemble and install the seal ring
4
Disassemble:
Pull it out upwards
Install:
Press it down to install
Disassemble:
Pull it out upwards
Install:
Press it down to install
NOTE:
1. Check if the seal ring and block proof cover are correctly installed in the
upper cover before use each time.
2. After use, please clean the seal ring and around of block proof cover for
avoiding jamming the cover, keep it clean to avoid bad odor.
3. Please do not pull the seal ring, otherwise, the distorted seal ring may
influence the seal and pressure effect.
4. Do not use the damaged seal ring, please replace it at the authorized repair
office.
