6
3.
When getting into the setting page, there are four working modes in the Wizard:
AP Mode, Bridge Mode, Router Mode, Repeater Mode.
4.
Click the AP mode and set up IP Address and Subnet Mask. The IP address and
Subnet mask should be within the same network segment as upper network and
can’t be in conflict with IP address from upper network router. After setting takes
in place, you can visit the device from the IP address you have set just now by
connecting internet with WAN port of the device or POE adapter LAN port.
Note 1: In AP mode, the IP address from the other devices connected the AP will
be allocated by the upper network router.
Note 2: The AP needs to set an intranet IP address (do not set the same IP
address as the upper router). If you want to manage the device, manually set the
IP address of the same network segment from the intranet IP.
5.
AP Mode: You can set up 2.4G/5.8G wireless SSID, password, channel and country
in advance. After setting up, the devices WAN port or POE adapter LAN port
connected internet, other mobile devices can connect the SSID to surf the
internet.
