__________________________________________________________
On each page there is also three buttons on the top right side:
Refresh
– Reload the stored parameters.
Refresh
– Reload the page. By reloading the page you can
cancel the modifications if you did not push the “Apply” button.
Save
– Save the full configuration of all parameters entered to
the flash memory of the AP. The parameters are then available
even after a power shut down or a reboot.
The “Apply” button in each web page is transferring the
parameters you configure in the web page into the RAM of the
AP. In case of power loss, the parameters will be lost.
Help
– Display for each page a description of the function and
different items in the page.
