Comelit IPNVR004BPOE, Manual

Page: 13 / 19

13
Copy to: choose the object route in the right select box , click
the button of “copy to”, then the informations of setting will be showed, which also can be applied in
other object routes. Or use can choose copy to “all” to make all channel in same setting.
After the setting, click the button of sure to exit with saving the setting , or click the botton of cancel
to exit without saving.
Sensor setup
In record setup , choose "Sensor setup", enter setting interface
Channel: choose the right channel
Work mode: setting to start alarm or not
Alarm duration: set up alarm duration time
Record channel: select the channel needed to be recorded when alarm is triggered
Alarm: “ ☑ ” enable alarm, “
□
” close alarm
Buzzer: “ ☑ ”start buzzer, “
□
” close buzzer
Copy to: choose the target channel in the right select box, click" copy to" ,the setting information will
be applied to other channel.
After the setting, click "OK" to exit with saving the , or click "cancel" to exit without saving.