10
If IP cameras are connected directly to NVR, there is no setup needed (PoE mode).
If not (Switch mode), before connecting and set up IPC, please confirm that IPC is already
connected to internet.
Right click on the preview interface, pop-up shortcut interface, click “Video Manage”, enter interface.
Search IPCs which connected to the same NVR network. Default NVR IP address is 192.168.1.114,
default IPC IP address is 192.168.1.168.
Auto Add: add all IPCs which in the same network and display in the different channels.
Add one: add the selected IPC
Delete channel: delete the selected connected IPC.
Modify/Manual Edit: modify the IPC parameters of the selected IPC
After finish setup, click “ Ok” button, it will be saved; click: “Cancel” button, it will be not save.
Record Setup
Select “Record setup” in system setup.
Channel
：
chose the channels as needed by clicking the inverted triangle
Weekday: chose the day as needed, "ALL" means all days in a week.
Schedule
：
every time slot can set different recording modes in all 4 time slot. "Time " recording with
red color, "Motion" recording with green color, "Sensor" recording with yellow color; “
☑
" means
enabled, “
□
” means disabled. The bottom parts has times status display, whole schedule from time
0~24 hours
Copy to
：
select the target channel on the right of "copy to "button, click "copy to" and ''Ok" to set
the current channel setup informations to other target video channel. By clicking the button "Cancel",
the setup informations are non-saved.
Summary of Contents for IPNVR004BPOE
Page 19: ...19 ...
