8
2.3 PTZ control and image switching
2.3.1 Device switching
As the above fig. 6 show, the user could switch Dome by the corresponding Dome ID
which is on the left of IP address list.
Press
button and No. of the corresponding Dome ID then
button .
Keyboard will switch to the corresponding IP address.
For example, in Fig. 6, to switch to the Dome with IP address 192.168.1.146, please press
button,
press “3” key and then press
.
Remark: device switching is also available from equipment management window. Please
select the corresponding IP address and press “Enter” to save and switch.
2.3.2 Joystick and key operation
Joystick Operation
3-axis joystick outline is as below:
3-axis Joystick can control speed dome as following:
(1) Control dome camera Pan and Tilt: moving the joystick in any direction, speed dome
will pan or tilt accordingly. User can control the speed of the dome by moving speed of the
joystick.
(2) Zoom Adjust: Rotate the joystick to zoom in and zoom out. Clockwise rotation of
Joystick, zooming in to get closer and larger image; Counterclockwise rotation to zooming
out, image will get farther and smaller.
Key Operation
【
Focus+
】
/
【
Focus-
】
: Manual adjust focus value of zoom module to get clear image
(default of zoom module is normally autofocus).
【
Zoom+
】
/
【
Zoom-
】
: zoom+/- get the ideal image.
【
Iris+
】
【
Iris-
】
: Adjust the aperture to get brighter or darker image gradually. (Some zoom
module is only with Auto Iris function)
【
Setup
】
: [Setup]+[Enter] to set the Preset point of the camera or set the short
commands of the keyboard (See 2.5).
【
Preset
】
: [[Enter] to call the Preset point.
【
Menu
】
: press to enter Menu or to Return back.
