37
EN
5. System function
5.1 PERFORMING CALLS
5.1.1 How to call from the external unit
To send the call from an external unit, touch the button
corresponding to the user you want to contact.
» On the external unit the caller illumination LED will light
up, the LED will flash and the confirmation tone will
sound. The video image from the external unit will appear
automatically on internal monitor/s.
»
If the system is busy:
the
LED will flash and the
external unit will emit the system busy tone.
5.1.2 How to answer a call from an internal unit
» On receipt of a call from the external unit you will hear the
call ringtone
Press to enter into communication with the caller
» the
LED will illuminate on the external unit.
Press again to terminate the call.
A call from the external unit always takes priority over an
intercom communication or a paging call
» the call in progress will be ended for the other devices.
the system is busy
1
2
5.2 PAGING CALL
5.2.1 How to initiate a paging call
Press to initiate the all-page chime
»
After the chime sounds, a 30 seconds message can be
broadcast to all monitors on the system (maximum 8
monitors).
5.2.2 How to answer a paging call
Press to answer the paging call
»
a (300 seconds) point to point conversation between the
two monitor is established.
»
the paging call will be terminated for the other devices.
A call from the external unit always takes priority over an intercom communication or a paging call
» the call in progress will be terminated for the other devices.
1
2