Comelit HFX-9000M, Technical Manual, Page: 29 / 129

29
EN
4.2.3.4 HOW TO PROGRAM THE SELF IGNITION FUNCTION
Example: key
√
Take note of the S1 setting and restore it when programming is complete
1 Enter programming mode
„
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2 2.1 Choose the function: refer to the "4.2.1 Preset function" table and select a S2 DIP
switches combination in which the self ignition function ( AI ) is listed for the keys you wish to
program.
Example: 1110
2.2 Addressing:
„ for self-ignition function don't set S1 DIP switches
3 Select the key to be associated with the function
„
Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4 Exit programming mode
„
To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5 When programming is complete,
„ S
et
S2
DIP switches 1-2-3-4 to the combination 1111 (
PROG
setting). In this DIP switch
setting, the keys control the programmed functions; the NON-programmed keys control
functions referred to on line 0000 (
"4.2.1 Preset function"
table) .
„
Restore the user code setting on S1.
4.2.3.5 HOW TO PROGRAM THE DOCTOR MODE
Example: key
√
Take note of the S1 setting and restore it when programming is complete
1 Enter programming mode
„
Set S2 DIP switch 5-6 to the combination 01
» the Privacy LED flashes
2 2.1 Choose the function: refer to the "4.2.1 Preset function" table and select a S2 DIP
switches combination in which the doctor mode ( D ) is listed for the keys you wish to program.
Example: 1000
2.2 Addressing:
„
for doctor mode don't set S1 DIP switches
3 Select the key to be associated with the function
„ Press and release the key to be associated with the function
» the lock-release LED lights up
» a confirmation tone will sound.
4 Exit programming mode
„
To exit programming mode, set S2 DIP switches 5-6 to the combination 00
» the Privacy LED switches off
5 When programming is complete,
„
S
et
S2
DIP switches 1-2-3-4 to the combination 1111 (
PROG
setting). In this DIP switch
setting, the keys control the programmed functions; the NON-programmed keys control
functions referred to on line 0000 (
"4.2.1 Preset function"
table) .
„
Restore the user code setting on S1.