5
EN
DIP-SWITCH
OFF
ON
DIP 1
LED disable
LED enable
DIP 2
1 pulse for alarm
2 pulse for alarm
DIP 3
2mt coverage
3.5mt coverage
DIP 4
alarm from all direction
Alarm from one direction*
DIP 5
1 --> 2 alarm
2 --> 1 alarm
*
To use the directional system optimally, you need to be inserted into the lens on the pyroelectric element separator (see figure)
and install it paying attention to the direction selection (dip-swtch5).
4. INSTALLATION AND CONNECTION
Choose a suitable location, mount the sensor using the turrets tear to get the tamper protection.
The cable can go from a tiny hole next to the terminals, or if the section is very large, you can switch from the knock-out (see figure
below).
turrets for tamper protection
cable entry hole
knock-out cable passage
1
2
1
2
1
2
+
+
TOP VIEW
SIDE VIEW
FRESNEL LENS
PLASTIC ADAPTER
2
1
1
2
3
4
5
housing screw
