Operation Manual – Art. 80153 (Version 1.1.6)
25
To playback by EVENT LIST, using [UP]/[DOWN] or channel number (CH1 for Page Up or CH2 for Page
Down) key on the front panel or remote control, select the event that you want to playback and press
“PLAY” button. Another way is to move the mouse up and down or click the left mouse button (“
◄
” for Page
Up or “
►
” for Page Down), select the event that you want to playback and double click the left mouse button.
Then it wills playback the recording video data.
5.6.7 PTZ SETUP
Adjust the RS485 setting depending on the PTZ camera that you have.
Our DVR system supports PELCO-D protocol and
PELCO-P protocol. Then we can see the diagram that is
on the right. For example, we select the channel 1 to set
up. Dome’s address is 1. Protocol makes use of
PELCO-D. Baud rate is 4800 and Dome’s speed is 7.
CHANNEL: Select a camera channel where PTZ
camera is connected.
ADDRESS: Dome’s address “0-255” (PELCO-D)
and”0-31” (PELCO-P).
PROTOCOL: Including “PELCO-D”, “PELCO-P”. Setting the protocol according to the dome’s protocol.
BAUD RATE: Press “SEL” button to select the value 1200, 2400, 4800, 9600, 19200 bps.
SPEED: Having “1-10” to select.
PRESET: If protocol is PELCO-D, preset includes “1-31”. If protocol is PELCO-P, preset includes “1-255”.
When it displays 0, it suggests that the place’s preset is not using.
Button function On The Front Panel or Remote Control:
「
Select
」
: Make the setting.
「
Up
」
「
Down
」
: Move the cursor.
「
SEL
」
: Increase Value.
「
REC
」
: Reduce Value or Auto-scan.
「
Ch1
」
「
Ch2
」
: Move the dome upwards and downwards.
「
Ch3
」
「
Ch4
」
: Move the dome leftwards and rightwards.
「
STOP
」
: Stop the dome running.
「
REW
」
「
FWD
」
: Zoom.
「
Pause
」
「
Play
」
: Focus.
