Operation Manual – Art. 80153 (Version 1.1.6)
11
2.5 Remote Control (optional)
3. GETTING STARTED
Install a hard disk drive into your DVR.
Connect cameras (up to 4) to DVR.
Connect other peripheral devices (mouse, USB Drive, external motion sensors or alarm) if necessary. PS/2
mouse must be connected to DVR before startup system.
Plug the power cord into the plug on the wall.
Start TV Monitoring and Recording.
Make sure that a hard disk drive and camera(s) are properly installed.
The hard disk (IDE) jumper setting must be set to “MASTER “!.
If the power is turned off while recording (i.e. a power failure), the DVR will enter “Power Recovery”
mode at start up, detect that it has been shut down and then reinitiate the recording process.
1. CH1
↑
Select or enlarge CH1 or Move dome up
2. CH2
↓
Select or enlarge CH2 or Move dome down
3. CH3
←
Select or enlarge CH3 or Move dome left
4. CH4
→
Select or enlarge CH4 or Move dome right
5.QUAD
Quad View
6.
◄◄
Z-
Rewind or Zoom-
7.
►
F+
Play record list or Focus+
8.
►►
Z+
Forward or Zoom+ or Channel auto sequence switch
9.
●
Manual recording or Stop manual recording or Reduce
value or Level scan
10.
▌▌
F-
Pause or Focus-
11.
■
Stop playing or Stop dome running
12. PTZ
PTZ Switch
13.Menu/ESC
Enter or exit setup menu
14.Select/Enter
Modify item or Increase value
15.UP
Move up the cursor
16.DOWN
Move down the cursor
