Comelit 49807, User Manual

Page: 32 / 36

User’s Manual
26
TIME OVERLAP
If the DVR’s time and date have been reset to a time that is earlier than the existing recorded video, it is
possible for the DVR to have more than one video stream in the same time range. In this case, you can search
overlapping video streams individually by selecting a specific segment.
For example, when the DVR has recorded video from one to five
o’clock and the user changes the time backward from five to three
o’clock and then continues recording until six o’clock, there will
be two video streams and segments from three to five o’clock.
You can search overlapping video streams by selecting a specific time or time range.
If you want to search recorded video at four o’clock during the overlapping time range
using a search menu such as
Go to the Date/Time , select the segment you want to search.
If you want to search recorded video from four to five o’clock during the overlapping time
range using a search menu such as
Event Log Search
, it is possible for the DVR to have
two overlapping start and stop times. You will be asked to select one of the overlapping
start and stop times from the search time ranges as follows:
From four o’clock of the first segment to five o’clock of the first segment
From four o’clock of the first segment to five o’clock of the second segment
From four o’clock of the second segment to five o’clock of the second segment
SYSTEM LOG
LOG MESSAGE LOG MESSAGE
Boot Up Auto Deletion
Upgrade (Local) Search Begin (Local/Remote)
Upgrade Failure (Local) Search End (Local/Remote)
Setup Begin Clip-Copy Begin (Local/Remote)
Setup End Clip-Copy End (Local/Remote)
Setup Imported Clip-Copy Cancel (Local/Remote)
Setup Import Fail Clip-Copy Failure (Local/Remote)
Setup Exported Time Change (Local)
Setup Export Fail Time Zone Change (Local)
Setup Export Cancel DISK FULL
Schedule On Shutdown
Schedule Off Restart
Clear All Data (Local) DISK# BAD
Format Disk