Comelit 49807, User Manual

Page: 24 / 36

User’s Manual
18
NOTES:
You will need to get the IP address or domain name of the DVRNS server from your network
administrator. When using the NAT (Network Address Translation) device, refer to the NAT
manufacturer’s instructions for the proper network settings using NAT.
The DVR name you entered should be checked by selecting the Check button, otherwise the DVRNS
changes will not be saved. When entering no name or a name already registered on the DVRNS
server, an error message displays.
Enable
: Select to set up the DVR to send an e-mail.
SMTP Server
: Set up the SMTP server IP address or domain
name obtained from your system administrator.
Port
: Set up the SMTP server port number obtained from your
system administrator.
Use SSL/TLS
: Select to send an e-mail via an SMTP server
requiring SSL (Secure Sockets Layer) authentication.
Authentication
: Choose if the SMTP server needs
authentication, and select
Use
in the Authentication box to enter
user ID and password.
Sender / Recipient : Choose to enter the sender’s/recipient’s e-mail
address. The e-mail address must include the “ @ ” character to be a
valid address.
CAMERA
No.
: Select to turn the camera On.
Title
: Choose to change the name of all or each camera.
PTZ : Choose to select the model of installed PTZ device.
ID : Choose to assign an ID to each PTZ device.
Port : Choose to select the communication port. If the PTZ port
is not set up, you will not be able to set up PTZ devices.
Setup… : Choose to set up port speed, data bit, stop bit and parity
of the connected device. Refer to the PTZ device manufacturer’s
instructions for the proper settings.
STORAGE
Capacity
: Displays the capacity of the storage device.
Disk Bad
: Displays the damage status of the storage device.
–
Not Formatted
: The device is not formatted.
–
Good
: The device is working properly though some portion
(%) of the storage is damaged.
–
Bad : More than 90% of the storage is damaged.
Temperature : Displays the temperature of the storage device.
–
N/A : The DVR cannot read the temperature.
–
Good
: The temperature is normal.
–
Bad
: The temperature is 70
o
C (158
o
F) or higher.