Comelit 40799, Manual, Page: 18 / 48

12
3.3 How to control the On-Screen Menu Utility
Action Function
MENU Call the On-screen menu utility
Joystick left or right
Go into the sub-menu items.
Execute the command (exit)
Change value.
Navigate through the menu items.
Joystick up or down Navigate through the menu items.
Joystick down Finish editing title.
Zoom handle twist
Change value.
Enter editing title mode.
CTRL + Joystick Change value of angle
ESC Escape (EXIT)
3.4 Auto Scan
(First Item of the Main menu / Shortcut: SCAN)
The Auto scan supports up to 4 programmed angles at user-programmable speeds. Follow
these steps to program Auto Scan:
AUTO SCAN SETUP
SCAN 01 : AUTOSCAN01
SPEED(MODE) : FAST VECTOR
START ANGLE : 127.1, 027.7
END ANGLE
: 157.7, 080.7
SCAN DIR. : CCW
SWAP : OFF
SAVE AND EXIT (ESC TO CANCEL)
HOLD DOWN CTRL KEY
WHILE SELECT POSITION.
SPEED (MODE) : NORMAL1~NOMAL9, SLOW VECTOR, FAST VECTOR
NORMAL1 (SLOWER)
↔
NORMAL9 ( FASTER)
The zoom is fixed at wider angle and the zoom magnification information
is not displayed.
In the vector mode, the dome moves from start point to end point including
tilt linearly.