50
SERIAL BRIDGE WITH SD CARD AND WEB SERVER FUNCTION ART . 20003101
The Serial Bridge module makes it possible to communicate with the SimpleHome home automation BUS and with
S-Series and VEDO anti-intrusion systems.
It can be used as follows:
User setup and management must take place via the WEB interface.
• Weekly schedule programming:
sends commands to outputs, zones, scenarios and thermostats within the
system.
• WEB Server
for system management via any browser (PC, smartphone, tablet).
• Rule management:
programs rules with up to 3 elements with AND/OR functions between inputs, outputs or
security/home automation timer in order to generate an event for transmission over the home automation BUS
or to the security system.
• Scenario management:
programs scenarios which include procedures to be sent to the SimpleHome
automation system and/or the S-Series or VEDO security system.
The Serial Bridge is a Web Server device which, by means of a PC browser, tablet, smartphone, etc. is able to do
the following without the installation of any additional programs:
From the Serial Bridge it is possible to configure:
1 .
Display/control areas of a compatible VEDO or S-Series alarm control unit.
2 .
Display the status of the first 80 wired inputs and the first 48 radio inputs of a compatible S-Series control
panel.
3 .
Display the status of all zones (wired and radio) of a compatible VEDO control panel.
4 .
Display/control 400 elements (lights, sockets, timed outputs, analogue inputs, thermostats, scenarios...) with a maximum
of 50 rooms, 50 RGB lights and 40 thermostats.
1 .
up to 32 timers
2 .
up to 32 rules with 3 elements each
3 .
up to 32 scenario commands with 20 elements each
ON
1 2 3 4 5 6
1
2
3
4
6
5
7
LED 1
LED 2
8
9
10
11
DEVICE FEATURES
