26
alarm input equipment is correct, stable and reliable, and the alarm set is right, please refer to sensor setup.
The prerequisite condition of whether the alarm recording can be activated by exterior input signal or the
motion is that the system must be set on schedule. In the menu of alarm setup, for exterior input alarm,
alarm enable of that channel must set to “ON”. For motion alarm, motion enable of that channel must set
“ON”, and set the right area for motion detect.
Under the state of off-schedule, system will never start alarm recording. Setting schedule on or off is
achieved through pushing the schedule button on the front panel, but not through system setup menu and
window. Under schedule-on situation, the character “S” will display on the screen,
Alarm video recording cannot stop by pushing record button, but can stop by removing schedule. Because
once the system is set on schedule, the schedule cannot be removed randomly, so there is a password
protection to remove schedule, only after inputting correct password, you can take schedule off.
Check alarm recording setup before recording; confirm the video quality and the frame rate, the record
setting cannot change during recording process.
As long as the alarm input signal is effective, the alarm recoding continues, when the alarm input signal
loses efficacy, the time set up by “REC TIME” becomes effective, and when the time goes out, the alarm
recording automatically stops. In course of this, if you want to manually stop alarm recording, the only way
is to remove schedule (answer the password).
6.5 Time Recording
Time recording starts and stops recording automatically according to the pre-arranged time period. It is
applied to fixed timetable. For example, the periodical work time recoding (of off time recording) with fixed
start/stop time.
To start time recording function, besides making record schedule setup beforehand, must push down the
schedule button on the front panel to set schedule on. While pushing down this button, the schedule symbol
“S” will display on the screen. Without pushing the schedule button, the time recording parameter setup will
not work.
The prerequisite condition of whether the time recording takes effective is system must be set on schedule.
In time record state, you can push again schedule button the enter password to stop time recording.
Because time recording is correlated closely with time, so before using this function should previously adjust
the time.
6.6 Playback
Push play button, system begins to play the images recorded
In the process of playing of fast backward playing, pushing play button will begin normal playing from the
current place.
