16/8 channels DVR art.49146-49148 User’s Manual
25
6. USER’S GUIDELINE
6.1 start the machine
Before starting the machine, please make sure all the items in the “Important Safeguards” at the beginning
of this manual are fulfilled.
Before starting the machine, please check the system connection, input and output equipment connection.
Please insure the video-recorder’s input video (NTSC/PAL) and the monitor (NTSC/PAL) meet the demands.
Start exterior equipment after checking over.
Insert the removable hard disk case to the end, and lock it up (turn right the hard disk lock); connect the
power, the machine start to work.
6.2 Turn off the Machine
Normally turn off the machine when the system shutdown, which means do not to turn off the machine while
playing or system setting up, especially not to turn off the machine while recording.
Push recording button to stop recording or push playing button to stop playing or exit from system setup
menu, then turn off the power.
If do not use the video recorder for a long time, should pull out the power line from the electrical outlet.
6.3 Normal Recording
Connect the power to all related equipments and ensure that there is video input.
Push display button to check spare space of the hard disk, if there is no much space, please think whether
to change hard disk first or select overwriting modes.
Check recording parameter setup before recording; select video quality, frame rate. You cannot change
record setting during the process of recording,
Manual recordings belong to normal recording. Under the manual mode (non-schedule status), pushing
record button will record all video channels.
Push the record button to begin recording, sixteen channels will start simultaneously recording. While in
normal recording mode, push record button, and enter the right password, it will stop recording.
During the process of recording, if the hard disk is full and the system is set to automatic overwrite,
then the recording will not be interrupted, and it begins to overwrite the earliest recorded area; if the
system is set to overwrite disable, it will stop recording.
6.4 Alarm Recording
Alarm recording is not started by manually pushing record button, the entire recording started by manually
pushing the record button are normal record.
Alarm recording can be activated by alarm input signal or motion, so it must to check whether the
connection of
