Comdial DIGITECH, System Manual

Page: 168 / 218

66-083
System Operation ,
CALL FORWARD
A station user can designate another station to be the
recipient of just the intercom calls and prime line calls
that are directed to the user’s station or the recipient of
all calls that are directed to the user’s station.
CALL FORWARD ALL
To forward all calls to another telephone,
Press ITCM.
CALL FORWARD PERSONAL
Dial 5.
Dial extension number of station to which calls are to
be forwarded.
To cancel all call forward,
Press ITCM.
Dial 5.
NOTE: For each intercom call received during call
forward, a ring reminder (short tone burst) will
be heard at the called station to remind the
user that calls are being forwarded.
To forward Intercom calls and prime line to
another telephone,
l
Press ITCM.
l
Dial 05.
l
Dial extension number of telephone to which calls
are to be forwarded.
To cancel intercom call and prime line forwarding,
l
Press ITCM.
Dial # 05.
AUTOMATIC CALL-BACK
To arrange
the system to call back when a
busy telephone becomes Idle,
l
handset. Called telephone will ring.
NOTE: Call-bad< is cancelled if handset is not lifted.
l
Make intercom call. Hear busy signal.
l
Dial 6.
l
Hang up. Calling telephone will ring when called
telephone becomes idle.
To answer call-back ring,
To cancel automatic call back before It rings,
l
Press ITCM.
l
Dial # 6.
l
‘Hang up.
CALL WAITING
A call waiting tone can be sent to a busy station while
the calling station watts on line for an answer.
To activate call waltlng,
l
Make intercom call and receive busy signal.
l
Dial 0 (Called and calling parties hear three
short tone bursts.1
To cancel call waltlng.
l
Hang up handset.
To answer a call tone,
l
Hear three short tone bursts over existing
conversation.
l
Complete present call or place it on hold.
Wait on line for an answer.
l
Hang up. Waiting call will begin ringing.
l
handset to answer.