Appendix C: Workstations
MicroBlaster MB1005
Comco Inc.
C-2
Issue Date: September 2003
Comco Inc.
Micro-Abrasive Blasting Workstations
Operation and Service
The Comco WS2200 and WS6000 series WorkStations are designed for use with the Comco
AccuFlo™, MicroBlaster®, DirectFlo™, and PowerFlo® blasters. Each workstation provides a
generous work chamber lighted by two fluorescent tubes. The work chamber has a large
tempered glass viewing window that is hinged to facilitate loading and unloading of parts. Two
5" arm holes with flexible rubber iris baffles permit access so that an operator may hold work
with one hand and a nozzle handpiece with the other. The workstation has a 4" dust exhaust
connection at the rear so that a high capacity dust collection unit may be used to keep the
abrasive dust completely controlled.
The Comco WS2200 and WS6000 WorkStations are designed to work as part of a micro-
abrasive blasting system consisting of the following:
1. The workstation
2. Pressurized air (gas)
3. An air filter-dryer
4. A dust collection unit
5. A micro-abrasive blaster (
AccuFlo™, MicroBlaster®, DirectFlo™, or PowerFlo®))
Refer to Section 2 for complete system set-up instructions.
Rev. 10/07
Summary of Contents for MB1005-1
Page 10: ......
