CombiSteel CUBE EC1, User Manual

Page: 12 / 51

12
www.combisteel.com
Note:

Do not press down the buttons for long time.

Excessive steam will come out from the drain pipe at rear of the oven.

Functions of
“
convection heater
”
and
“
top heating
”
must be running separately. The operator
cannot use these two functions simultaneously.

Do not operate the switches with wet hands, otherwise, it may cause electric shock easily.

During operation, it is not allowed to place any objects onto the oven. Because heat generated by the
working oven can deform or damage the objects.

Caution burns during or after using for a while.

During working, the metal accessories and glass door will get hotter and hotter, thus, do not touch the
door when opening or closing the door.

The heat elements cannot be submerged in water. If water comes into the connection part of the
heating elements, it may cause short circuit or other consequences.

If there
’
s water in the chamber, do not pour out the water towards the glass door, or the glass door
may break.

During heating, please do not touch any parts other than the handle and switches due to the hot body
of the oven, or you may easily get burnt if you touch other parts. If the oven is submerged in water
accidentally or the oven is in water for too long, all the electric components and wires shall be
substituted, otherwise, it may be easy to catch fire or cause electric shock.

Do not place heavy objects (120kg) onto the oven. Otherwise, the oven may operate abnormally or
other accidents may occur.
6. Routine Inspection
1. Stop using if user feels that there are some problems in the pipeline or machine.
2. Check the situation of the machine before or after using every day.
3. Check that whether the machine is tilted before using.
4. Check that whether the control panel is damaged.
5. Check that whether there is strange odor or smell during using.
6. Check that whether there is vibration noise.
7. Cleaning & Maintenance
1. Before cleaning, cut off the power supply first to avoid unexpected accidents.
2. Before cleaning, open the oven door and cool the appliance down (at least 10min) then have the work done.
3. Clean the chamber and storage area every day to maintain it clean.
4. After working every day, clean the furnace surface and power cord with wet towel containing non-corrosive
detergent. Do not aim at the appliance with water directly. Water infiltration may damage the electric
performance and cause safety accident.
5. If not going to use the appliance at any time, turn off the power switch, then bundle up the power cord and
put it onto the oven body.
6. If not going to use the appliance for a long period of time, clean it completely and seal it with a plastic bag,
then put it into a carton and store it in a well-ventilated warehouse without any corrosive gases.