5
www.combisteel.com
Operating your unit
Setting the temperature control
Your unit has only one control for regulating the temperature in the compartment. The temperature control
is located at the lower right hand side of the compartment.
The first time you turn the unit on, set the temperature control to “5”.
The range of the temperature control is from position “0” to “5”. After 24 to 48 hours, adjust the temperature
control to the setting that best suits your needs. The setting of “3” or “4” should be appropriate for home
or office use.
To turn off the appliance, turn the temperature to “0”.
NOTE:
Turning the temperature control to “0” position stops the cooling cycle but does not shut off the power to
the unit.
If the unit is unplugged, has lost power, or is turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the unit will not start.
Energy saving tips
The unit should be located in the coolest area of the room, away from heat producing appliances and out of
the direct sunlight.
Let hot foods cool down to room temperature before placing them in the unit. Overloading the unit forces
the compressor to run longer.
Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts down on
frost build-up inside the unit.
Unit storage bin should not be lined with aluminium foil, wax paper or paper towelling. Liners interfere with
cold air circulation, making the unit less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many items as needed
at one time, and close the door as soon as possible.
