4
www.combisteel.com
Blending Fruit & Vegetable
1.
Put fruit or vegetable and little water into the container.
2.
Set medium speed or high speed.
3.
Turn On SET switch, after 4-6 seconds blending, when the material roll smoothly , which means the material
has been enough mashed, Stop the machine at once, to prevent over blending.
Note:
1.
Inching switch is mainly for testing or blending special materials, do not use it frequently.
2.
Do not run more than 2 minutes when blending dry materials.
Control Panel
Mechanical Control Panel
ON/OFF Switch
Up for ON; Down for OFF.
HIGH/LOW Pulse Switch
Up for High speed at 29000rpm;
Down for Low speed at 16000rpm.
Pulse button can only be used
when the power switch is ON, The
PULSE switch can be used to quickly
refresh product in the container by
depressing the switch and holding
down as long as needed.
VARIABLE SPEED Dial
Allow user to select continuously variable motor speeds ranging from 16000rpm to 29000rpm.
PULSE switch is overrides the variable speed dial.
Remark
1.
On all units the built-in thermal sensor keeps track of how hot the motor gets and will automatically
shut down the motor if the motor is overheating. User should remove the container and run the
machine until cool. This takes about 2 minutes.
2.
Special Note
:
Please check your operation when the motor is overheated. If the machine run all the day or the
material is too thick , it will easy to get overheated.
Specification
Model
7013.2515
Voltage
230V~50Hz
Capacity
2000c.c
Endurance of Container
-40
℃
~180
℃
Power
1500W
Weight
5.5kgs
Length of Cord
1.8M
Dimension
W210xD230xH520mm
Protector
Current protector, Thermal protector for motor
*110V machine is available in 15A plug. 220V machine is available in 10A plug.
